2:1 Adhesive Lined Dual wall Heat Shrink Tubing
Sold in 4 Ft Sticks 1/8" - 1-1/2" Available 5 - 100 Pc Packs
2:1 Dual Wall Heat Shrink Tubing Features
- Shrink Ratio: 50% or More In The Radial Direction, 5% or Less In The Axial Direction
- Continuous Operating Temperature: - 55℃(-67℉) to 110℃ (230℉)
- Flammability: UL VW-1 (Jacket only except clear)
- Excellent Electrical Insulation Properties
- AMS-DTL-23053/4 Class 2 (Formerly MIL-DTL-23053/4 Class 2)
- UL 224 (File Number: E319314)
- ROHS Compliant
Please Note: Our Diameters for Heat Shrink Tubing are measured as ROUND TUBE, NOT FLAT.
This 2:1 Dual wall or adhesive lined heat shrink tubing is designed for general purpose applications such as the insulation and strain relief of electrical connections and terminations, light-duty harnessing, jacketing and bundling. The adhesive lining forms an environmental seal that helps protect against moisture.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
|physical||Unaged||Tensile Strength||ASTM D638||Min. 1500psi|
|Fluid Resist.||Tensile Strength||ASTM D638||Min. 1000 ps|
|Dielectric strength||ASTM D2671||Min. 400 Volts/mil|
|Heat shock||250â„ƒ/4 hrs||No cracks, flowing, or dripping|
|Low temperature flex||ASTM D746||No crack @-55â„ƒ|
|Secant Modulus||ASTM D882||Max. 25,000 psi|
|Heat Resistance||ASTM D2671||No cracks|
|Electrical||Dielectric strength||ASTM D2671||Min. 500 Volts/mil|
|Volume resistivity||ASTM D876||Min. 1x1012Î©- cm|
|Chemical||Copper corrosion||121â„ƒ16hrs||No corrosion|
|Fungus resistance||ASTM G21||No growth|
|Water Absorption||ASTM D570||Max. 0.5%|
|Internal Diameter |
|Internal Diameter |
|Minimum Total Wall |
Thickness (Total Wall) (T)
|Normal Wall Thickness |
(Adhesive Wall) (T)
Request A Quote
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Q:What is the best way to shrink heat shrink tubing?
A:To shrink the heat shrink tubing we recommend using our heat guns that are specifically designed to produce the correct amount of heat to shrink tubing for wire protection.