ConvoShield Chrome Wire Loom
1/4" to 3/4" Dia, Aluminized Ideal For Automotive Applications
Convoshield chrome wire loom tubing
- 37.40" In Total Length
- Aluminized Coating Provides Protection Up To 1000°F
- Provides Thermal Protection
- Resistant To Automotive Fluids
- Chrome Finish
- Slit Length wise For Easy Installation
The ConvoShield Aluminized Split Tubing; a cost-effective and a practical way of protecting cables and wires from heat and high-temperature environments. ConvoShield Aluminized split wire loom was primarily designed to provide thermal protection for components that are highly exposed to heat. This product was tested and approved to provide some degree of static dissipation, RFI shielding and can withstand heated environments up to 1000°F.
One of the most annoying and time-consuming problems that people encounter today are automobile wiring defects and breakdowns. Especially for busy people, car problems are a nightmare because it disrupts all plans and scheduled tasks for the day. Likewise, industries that use machinery or industrial vehicles may encounter the same problems causing delays in manufacturing due to wire and cable breakdowns. This chrome finished ConvoShield is resistant to automotive fluids, classed as insulative against 12-volt battery currents, and very easy to install with its lengthwise slit. This product is being used and has been very popular to car owners, automobile industries and other manufacturing companies. Available in sizes of 3/8”, 1/2”, 5/8”, and 3/4”, with a standard length of 37.40”.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
|Heat Aging||Aged at 170° C for 168 hours||No damage to product|
|Cold Bend Test||Low temperature flexibility||-40°C|
|BH100-003 (ref MS-NA1-7)||Fluid resistance (30 min soak) |
Brakes Fluid, Gasoline, Diesel Fuel(60 min), Antifreeze Solution, Motor Oil, Transmission Fluid, Power Steering Fluid, Distilled Water, 3% Salt Solution, Washer Fluid
|No sign of product degradation or delamination of coating|
|Heat Distortion||Oven aging at 180°C for 3 hours||Product not flat or distorted|
|FMVSS 302 Automotive||Flammability Test||Pass|
|Applied voltage rate of 500 V/s in dielectric chamber||Electrical Conductivity||Classed insulative in 12V applications|
|Exterior Surface||Highly Reflective Aluminum||N/A|
|Substrate Base||Nylon Copolymer||N/A|
|Substrate Surface||Thermoplastic Molded Tubing|
Max Operating Temperature: +175°C (+347°F)
Min Operating Temperature: -40°C (-40°F)
Heat Protection Type: Radiant
Diameters:1/4” to 3/4”
Availability: Cut lengths (37.4”)
Request A Quote
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Q: Are there longer lengths than 37.40" I can purchase?
A: Unfortunately, due to the manufacturing process these tubings can be no longer than 37.40" in total length