BOSCH® 8-1/2 In. Single-Bevel Slide Miter Saw - CM8S
Delivers a well-balanced saw with top handle at the center of gravity
0.0 / 5
BOSCH® 8-1/2 In. Single-Bevel Slide Miter Saw Features
- Ultimate portability – Bosch exclusive design delivers a well-balanced saw with a top carry handle, and a weight of only 37 Lbs. easily provides one-handed portability on and off the job
- Easy access bevel controls - bevel lock lever and bevel turret stops are located on side of tool for quick and easy adjustments
- Integrated expanding base extensions - expands up to 29 In. left to right for additional work-piece support
- Large easy-to-read miter and bevel scales - uniform marks from 52˚ left to 60˚ right with 10 adjustable miter detents set at most common cuts
- Adjustable front stabilizing foot - maintains saw stability when performing slide cuts allowing maximum capacity: cross cut 12-1/4” at 0˚, 8” at 45˚, 2-3/4” upright, 3-1/2 crown
- Miter detent override - intuitive easy to access thumb-actuated override
- Ergonomic ambidextrous trigger handle - form fitting handle provides comfort for all day use
- Clear lower guard - for unobstructed view throughout the cut
The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 In.) as a 10 In. miter saw, at 30% lighter weight.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
TECHNICAL DATA
| Amperage | 12.0 |
| Bevel Angle Range | -2° to 47° |
| Bevel Stops | 0°, 22.5°, 33.9°, 45° |
| Blade Diameter (in) | 8.5 |
| Blade Size | 8-1/2” |
| Case Type | No Case Included |
| Category | Compound Miter Saws |
| Crown Molding - Angled Against Fence | 3-1/2" |
| Dust Collection | Yes |
| Electric Motor Brake | No |
| Height | 18.0" |
| Height of Table from Base Feet to Table Surface - In. | 2.44 |
| Length | 32.0" |
| Max. Base Molding Against Fence | 2-3/4 In. |
| Max. Crown Molding (38° Spring) Angled Against Fence | 3-1/2 In. |
| Max. Crown Molding (45° Spring) Angled Against Fence | 3-3/4 In. |
| Max. Cut Capacity - 0° Miter 0° Bevel | 2.75 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber) |
| Max. Cut Capacity - 0° Miter 45° Left Bevel | 1-1/2 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber) |
| Max. Cut Capacity - 0° Miter 45° Right Bevel | Not possible |
| Max. Cut Capacity - 45° Miter 0° Bevel | 2.75 In. x 8 In. (Can cut 2x8 Dimensional Lumber) |
| Max. Cut Capacity - 45° Miter 45° Left Bevel | 1-1/2 In. x 8 In. (Can cut 2x8 Dimensional Lumber) |
| Max. Cut Capacity - 45° Miter 45° Right Bevel | Not possible |
| Miter Angle Range | 52° Left, 60° Right |
| Miter Detents | 0°, 15°, 22.5°, 31.6°, 45°, (Left/Right) 60°, (Right) |
| Miter Positive Stops | 0°, 15°, 22.5,° 31.6°, 45° (Left/Right), 60° (Right) |
| No Load RPM | 5,600 |
| Separate On/Off Speed Control | No |
| Voltage | 120V |
| Weight | 37.0lb |
| Width | 18.0" |
| Works With | Miter Saw Stands Crown Molding Stops (Pair) Length Stop Anti-Static Vacuum Hoses Other Vacuum Hoses Adapter for 1-1/4 in and 1-1/2 in. Vacuum Hoses Adapter for 2-1/2 in. Vacuum Hoses |
| Includes | (1) CM8S 8-1/2 In. Single-Bevel Slide Miter Saw, (1) 8-1/2 In. 40-Tooth Carbide-Tipped Blade , (1) Blade Wrench , (1) Dust Bag Assembly, (1) Toolless Work Piece Clamp |
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can fill out the ORDER RETURN FORM HERE. If your return is accepted, we’ll send you the instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like custom products (such as special orders or personalized items). Please get in touch if you have questions or concerns about your specific item. Certain Items will Carry restocking fees for us to take back into our stock, This is due to items being made to order or for being an oversized item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Looking for a quotation ? We would be happy to help by providing a quick response, inventory status, and Volume Level pricing, when available. Please fill out the form below and a representative will be in touch with you within hours to one business day to answer any questions and quote your request.
Product Details
The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read miter and bevel scales, and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 In.) as a 10 In. miter saw, at 30% lighter weight.
Product Specifications
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
TECHNICAL DATA
| Amperage | 12.0 |
| Bevel Angle Range | -2° to 47° |
| Bevel Stops | 0°, 22.5°, 33.9°, 45° |
| Blade Diameter (in) | 8.5 |
| Blade Size | 8-1/2” |
| Case Type | No Case Included |
| Category | Compound Miter Saws |
| Crown Molding - Angled Against Fence | 3-1/2" |
| Dust Collection | Yes |
| Electric Motor Brake | No |
| Height | 18.0" |
| Height of Table from Base Feet to Table Surface - In. | 2.44 |
| Length | 32.0" |
| Max. Base Molding Against Fence | 2-3/4 In. |
| Max. Crown Molding (38° Spring) Angled Against Fence | 3-1/2 In. |
| Max. Crown Molding (45° Spring) Angled Against Fence | 3-3/4 In. |
| Max. Cut Capacity - 0° Miter 0° Bevel | 2.75 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber) |
| Max. Cut Capacity - 0° Miter 45° Left Bevel | 1-1/2 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber) |
| Max. Cut Capacity - 0° Miter 45° Right Bevel | Not possible |
| Max. Cut Capacity - 45° Miter 0° Bevel | 2.75 In. x 8 In. (Can cut 2x8 Dimensional Lumber) |
| Max. Cut Capacity - 45° Miter 45° Left Bevel | 1-1/2 In. x 8 In. (Can cut 2x8 Dimensional Lumber) |
| Max. Cut Capacity - 45° Miter 45° Right Bevel | Not possible |
| Miter Angle Range | 52° Left, 60° Right |
| Miter Detents | 0°, 15°, 22.5°, 31.6°, 45°, (Left/Right) 60°, (Right) |
| Miter Positive Stops | 0°, 15°, 22.5,° 31.6°, 45° (Left/Right), 60° (Right) |
| No Load RPM | 5,600 |
| Separate On/Off Speed Control | No |
| Voltage | 120V |
| Weight | 37.0lb |
| Width | 18.0" |
| Works With | Miter Saw Stands Crown Molding Stops (Pair) Length Stop Anti-Static Vacuum Hoses Other Vacuum Hoses Adapter for 1-1/4 in and 1-1/2 in. Vacuum Hoses Adapter for 2-1/2 in. Vacuum Hoses |
| Includes | (1) CM8S 8-1/2 In. Single-Bevel Slide Miter Saw, (1) 8-1/2 In. 40-Tooth Carbide-Tipped Blade , (1) Blade Wrench , (1) Dust Bag Assembly, (1) Toolless Work Piece Clamp |
Product Manuals
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Videos
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can fill out the ORDER RETURN FORM HERE. If your return is accepted, we’ll send you the instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like custom products (such as special orders or personalized items). Please get in touch if you have questions or concerns about your specific item. Certain Items will Carry restocking fees for us to take back into our stock, This is due to items being made to order or for being an oversized item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Related Items
| PART # | |
|---|---|
|
|