CALL TOLL FREE
Direct Calling 1-647-259-0915
Open to the Public
Mon-Thu 8Am - 8Pm EST / Fri 8Am - 5Pm EST
Shop By Brand Manufacturers
PRODUCT LEARNING CENTER
Wednesday, November 17, 2010
E-Z Roll Rack Wire Dispenser is the ultra compact /collapsible wheeled wire dispenser. When you are ready to pull wire, wheel the E-Z Roll into position and dispense wire directly from your pipe bender or 1" EMT
Thursday, November 04, 2010
Pull-tight Ties offer unparalleled tamper-evident security. Insert the strap-end into the locking barrel and pull it tight to seal, leaving the strap- end attached. Water resistant and virtually impervious to hot and cold weather extremes
Friday, October 22, 2010
Please check out the new products in our Traffic Safety Supplies section. Parking stops, Eagle Ramps & Dockplates, Wall Protectors, Speed Bump/Cable Protector, The Poly Curb Ramp, and Corner Protectors to help with convenience and safety!
Tuesday, August 24, 2010
IGUS® E-Chain® carrier systems are developed and widely used to guide, protect and support cables and hoses on automated machinery. We sell several different models and kinds with many different features.
Friday, August 06, 2010
Solves common problems like hard-to-reach outlets located behind furniture, blocked outlets on surge protectors, and huge "wall wart" device chargers. Our new 360-degree Flat Plug Liberator cord not only lets you use outlets located behind furniture, but it also rotates to aim the cord where it won't get in the way or bent up. These durable short extension cables meet or exceed all electrical code and UL requirements for safety.
Wednesday, June 30, 2010
Suitable for Concealed, Exposed, or Approved Raceways. Use for conduit bending, and wire fishing and pulling. This tape conveniently winds into the housing without messy retaining tapes or sticky residue. Plus, the hand trigger smoothly winds the tape tight without kinks or jams. This durable blue steel tape resists kinking, breaking and corrosion, and is strong! Tensile strength is 2,100 lbs. The case is made from impact-resistant plastic, and has a textured surface for a positive grip. 50ft x 1/8in roll.
Tuesday, May 11, 2010
The YJ Transport Cart is designed to easily carry Yellow Jacket 5 Channel and Bumble Bee 5 Channel Cable Protectors with dog bone connectors. Made from steel, it is strong enough to transport a maximum 10 cable protectors. Not only can you easily move your cable protectors around with this cart, you can also use it as a storage unit until your next event. No assembly required!
Wednesday, May 05, 2010
Check out the new homepage for Cord Covers, Cable Ramps and Cable Protectors. It is easier to navigate and find the exact cord cover for you!
Monday, May 03, 2010
Perfect for Customizing engines and motorcycles. This is a cost effective and practical approach to keeping heat exposed cables and wires protected. Designed by Bentley Harris, this product provides excellent thermal protection for cables and hoses used in radiant heat environments up to 1000°F. ConvoShield can provide some degree of static dissipation and RFI shielding according to some tests. Also, this chrome finished ConvoShield is resistant to automotive fluids, classed as insulative against 12-volt battery currents, and very easy to install with its lengthwise slit.
Wednesday, April 28, 2010
These Rubber Duct Protectors are designed to handle carts as well as pedestrian traffic. They can be used to protect various sizes and types of wires and cables from phone lines up to cables that are 1.5" in diameter. They are ideal for organizing and protecting cords and cables while reducing tripping hazards. Unslit protectors can easily be slit on the bottom for easy cord installation. Some models are available slit. The grooved underside helps prevent slippage.
Monday, April 12, 2010
PRO-10 Series CM10 Cable Tray systems are innovative in their design based on pre-fabricated junctions/intersections and the ability to provide powder coated finishes while maintaining ground. Cutting and bending of sections is eliminated. PRO-10 Series CM10 trays are UL classified as to its suitability as an equipment grounding conductor only. They are easy to install; requiring only one tool and very few accessories. No connecting hardware required. All support hardware available to match finish. Powder coating is standard finish.
Friday, April 09, 2010
Pops up with one touch. Unopened, unit sits flush with table or desk surface. Made for anodized aluminum. Reliable and durable. Pre-wired with 1.5 meters of cable. Color: anodized black..
Tuesday, March 30, 2010
Become a fan of Cable Ties and More on Facebook.
Wednesday, March 24, 2010
This tilting wall mount kit is specially designed for extra-large flat panel TV′s. Adjust your viewing angle with the touch of a finger. Bracket is constructed from heavy gauge steel, providing strength and durability. After installation, TV will be positioned just 3 inches from the wall for a clean low profile appearance. Bracket is a universal fit for 32" to 60" TV′s weighing up to 175 lbs
Monday, March 22, 2010
All surface raceway parts are made of strong, durable, lightweight, UL 94-VO compliant flame resistant PVC that is also paintable (Latex) and are an attractive solution for wire enclosure applications in many different environments. Triangular corner raceway blends into wall/ceiling junctions to provide a clean, finished appearance. Can be used as crown molding in home theater applications Snap on cover allows for easy and speedy installation
Wednesday, March 10, 2010
Braided from thin metallic Mylar strips along with transparent PET monofilament, this sleeving truly creates a sparkling, highly reflective effect. Economical, easy to install, halogen free, great for creating spectacular highlights and visual effects and is RoHS compliant. Minimum Operating Temperature: Minus 94°F/Minus 70°C . Maximum Operating Temperature: 257°/125°C. Melt Point: 482°F/250°C .
Friday, March 05, 2010
The M.E.2 wire cable tray is easy to install and efficiently provides cable management and protection for cables. The cable tray straight and junction sections are easily joined together using installer friendly splice washers, or time saving splice connection loops. Straight trays can be cut to shorter lengths using an off-set blade bolt cutter tool. Vertical and horizontal bends are easily made at the installation site by cutting and removing wires.
Tuesday, March 02, 2010
Check out updates regarding Industrial Cord Covers. We can help you find a solution for all of your cable cover needs and inquiries!
Monday, March 01, 2010
The Tilt ‘N Plug™ Series of power data centers provide numerous solutions with input panels on opposite sides of a central unit that appear when needed and are hidden flush with the table when not in use. Tilt 'N Plug Jr box can be custom configured to suit your specific need. The central element of many audiovisual presentation systems is a conference table.
Wednesday, February 24, 2010
Cable Hider PVC raceways is an easy to use and economical alternative to metallic raceways. They are a good solution to guide and protect cables and wires in applications in the home or office environment. They can be painted to match the color of your walls with latex based paint. Easy to install, just simply remove adhesive backing from base and apply to clean surface.
Tuesday, February 23, 2010
New Items! Cable Clamps, Wire Clips and Adhesive Mounts to help you easily install and organize your projects working with bundles of cables, wires, tubes, and cable ties.
Thursday, February 18, 2010
We have updated our website. Easily search new items, sale items and most popular items right from the home page. Check out the new look and new editions!
Wednesday, February 17, 2010
The easy way to add 6 outlets. Simply mount, plug into an existing power source, and your done, making power available where you need it.
Copyright © 2006 - 2013 Cable Ties And More
Cable Ties And More | RSS Feed | Newsrm feed, cable ties and more news page