Techflex® Clean Cut® Braided Cable Sleeving
Non-Fray Sleeving - Can Be Cut With Scissors
0.0 / 5
Techflex® Clean Cut Braided Sleeving Features
- Resistant To Fraying When Cut With Scissors
- Increased Braid Density For Fuller Coverage
- High Abrasion Resistant
- Cut Resistant
- Expands Up to 150% or More
- Braided from 0.10" PET Monofilament Yarns
- Halogen-Free - RoHS Compliant
- FAR 25, FMVSS 302 Approved
- Melt Temp: 482°F / 250°C
- Operating Temps: -94°F to 257°F (-70°C to 125°C)
Clean Cut sleeving is designed for ease of installation when a hot knife is either unavailable or impractical. When cut with scissors, the specially engineered filaments will tend to cling to each other minimizing end fray during installation, while still allowing full expandability of the sleeving. This fray-resistant characteristic is accomplished without the use of chemical additives or bonding agents. This results in a cleaner product and eliminates possible chemical contamination. Because of this unique construction, Clean Cut has a very soft feel and the increased braid density provides for fuller coverage. Clean Cut is braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors. By adjusting the physical characteristics of the polyethylene terephthalate filaments, the Techflex engineers have produced a product with the same specifications as our PET sleeving with the unique advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives. Flexo Clean Cut is ideal for field installers and other situations where access to a hot knife is impossible. Clean Cut's fray resistant properties allow frequent expansion of the cut end without unraveling. When cut with a hot knife, Clean Cut produces a clean, smooth, and virtually frayless end. Clean Cut PET expandable sleeving is braided from 8 mil polyethylene terephthalate (PET) monofilament yarn. The sleeving easily expands up to 150% and gently constricts around irregular shapes. It remains flexible over a wide temperature range and is resistant to chemical degradation and abrasion. Clean Cut PET is tested and approved for use under FAR 23/25, FMVSS 302, UL, and CSA material standards. Additionally, it is in compliance with RoHS, the European directive on the Restriction of Hazardous Substances.
Require Splice Free? Please Call 1877-284-7760
Inside Diameters Are Measured as Round Not Flat
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Nominal Size | Product Part # | Expans. Range | Standard Spool Put-Ups | Colors | Lbs/ 100' | ||
| Min. | Max. | Bulk | Shop | ||||
| 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" | CCP0.13 CCP0.25 CCP0.38 CCP0.50 CCP0.75 CCP1.00 CCP1.25 CCP1.50 CCP1.75 CCP2.00 | 1/8" 5/32" 3/16" 1/4" 5/8" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" | 1/4" 7/16" 5/8" 3/4" 1" 1 3/16" 1 1/2" 2" 2 1/8" 2 1/2" | 1,000' 1,000' 500' 500' 250' 250' 250' 250' 200' 200' | 100' 100' 100' 100' 75' 50' 50' 50' 50' 50' | 2 2 2 2 2 2 2 2 2 2 | 0.40 0.46 0.74 0.82 1.11 1.24 1.56 1.85 2.30 2.80 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | .008 |
| Flammability Rating | UL-94 |
| Recommended Cutting | Hot Knife/Scissor |
| Colors | 2 |
| Wall Thickness | .024 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | 6 |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.38 |
| Moisture Absorption % (ASTM D-570) | .1 - .2 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .19 |
| CVCM | .00 |
| WVR | .16 |
| Smoke D-Max (ASTM E-662) | 56 |
| Outgassing | Medium |
| Oxygen Index (ASTM D-2863) | 21 |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 2 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 3 |
| Weak Bases | 1 |
| Strong Bases | 2 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-A-8243) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 3 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 1 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 257°F/125°C |
| Melt (ASTM D-2117) | 482°F/250°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| SVHC | None |
| UL/CSA | Yes |
25% Restocking Fee Applicable
30 Day Return & Refund Policy
If you are not entirely satisfied with your purchase, we're here to help. You have 30 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging.
You are required to have an RMA (Returned Merchandise Authorization) assigned by our customer service team. To apply for an RMA request Form linked here.
Undeliverable Shipments:
- In the event that the customers shipping address provided is deemed undeliverable by the shipping carrier, shipping fee's will not be refunded. Instead it is the customers responsibility to provide a deliverable address.
DEFECTIVE, DAMAGED, OR INCORRECT ITEMS SHIPPED
If you have received a defective, damaged, or incorrect product, do not worry! Please contact us by phone or the Contact Us Form within five (5) days of receiving the product, along with the invoice or packing slip, to schedule a return. We will replace these products at no additional cost. Please keep in mind that we may require photos for documentation and to authorize call tags for returns.
Because we put our customers’ experience first, any defective, damaged, or incorrectly shipped products by CTAM, or by our manufacturers, will be re-shipped at our expense. We will also provide you with a return shipping label with detailed shipping instructions.
Please note that if the item is damaged as a result of the customer’s actions, then a return will not be approved, and the damaged items will be discarded. If the customer wants to keep the damaged items, they must first cover the shipping fees, after which the company will return the damaged items. After the five (5) day time has expired, CTAM will not be responsible for any defective, damaged, or incorrect items, regardless of who is at fault.
Refunds
Once we receive your item, we will inspect it and we will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within 48 hours after product condition is verified.
Shipping Fees
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. For additional information in this section, create your own Return & Refund Policy.
Contact Us
If you have any questions on how to return your item to us, contact us using our Email Form Here… Or call during our business working hours at 1-877-284-7760
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Looking for a quotation ? We would be happy to help by providing a quick response, inventory status, and Volume Level pricing, when available. Please fill out the form below and a representative will be in touch with you within hours to one business day to answer any questions and quote your request.
Product Details
Clean Cut sleeving is designed for ease of installation when a hot knife is either unavailable or impractical. When cut with scissors, the specially engineered filaments will tend to cling to each other minimizing end fray during installation, while still allowing full expandability of the sleeving. This fray-resistant characteristic is accomplished without the use of chemical additives or bonding agents. This results in a cleaner product and eliminates possible chemical contamination. Because of this unique construction, Clean Cut has a very soft feel and the increased braid density provides for fuller coverage. Clean Cut is braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors. By adjusting the physical characteristics of the polyethylene terephthalate filaments, the Techflex engineers have produced a product with the same specifications as our PET sleeving with the unique advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives. Flexo Clean Cut is ideal for field installers and other situations where access to a hot knife is impossible. Clean Cut's fray resistant properties allow frequent expansion of the cut end without unraveling. When cut with a hot knife, Clean Cut produces a clean, smooth, and virtually frayless end. Clean Cut PET expandable sleeving is braided from 8 mil polyethylene terephthalate (PET) monofilament yarn. The sleeving easily expands up to 150% and gently constricts around irregular shapes. It remains flexible over a wide temperature range and is resistant to chemical degradation and abrasion. Clean Cut PET is tested and approved for use under FAR 23/25, FMVSS 302, UL, and CSA material standards. Additionally, it is in compliance with RoHS, the European directive on the Restriction of Hazardous Substances.
Require Splice Free? Please Call 1877-284-7760
Inside Diameters Are Measured as Round Not Flat
Product Specifications
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Nominal Size | Product Part # | Expans. Range | Standard Spool Put-Ups | Colors | Lbs/ 100' | ||
| Min. | Max. | Bulk | Shop | ||||
| 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" | CCP0.13 CCP0.25 CCP0.38 CCP0.50 CCP0.75 CCP1.00 CCP1.25 CCP1.50 CCP1.75 CCP2.00 | 1/8" 5/32" 3/16" 1/4" 5/8" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" | 1/4" 7/16" 5/8" 3/4" 1" 1 3/16" 1 1/2" 2" 2 1/8" 2 1/2" | 1,000' 1,000' 500' 500' 250' 250' 250' 250' 200' 200' | 100' 100' 100' 100' 75' 50' 50' 50' 50' 50' | 2 2 2 2 2 2 2 2 2 2 | 0.40 0.46 0.74 0.82 1.11 1.24 1.56 1.85 2.30 2.80 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | .008 |
| Flammability Rating | UL-94 |
| Recommended Cutting | Hot Knife/Scissor |
| Colors | 2 |
| Wall Thickness | .024 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | 6 |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.38 |
| Moisture Absorption % (ASTM D-570) | .1 - .2 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .19 |
| CVCM | .00 |
| WVR | .16 |
| Smoke D-Max (ASTM E-662) | 56 |
| Outgassing | Medium |
| Oxygen Index (ASTM D-2863) | 21 |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 2 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 3 |
| Weak Bases | 1 |
| Strong Bases | 2 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-A-8243) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 3 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 1 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 257°F/125°C |
| Melt (ASTM D-2117) | 482°F/250°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| SVHC | None |
| UL/CSA | Yes |
Product Manuals
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Videos
25% Restocking Fee Applicable
30 Day Return & Refund Policy
If you are not entirely satisfied with your purchase, we're here to help. You have 30 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging.
You are required to have an RMA (Returned Merchandise Authorization) assigned by our customer service team. To apply for an RMA request Form linked here.
Undeliverable Shipments:
- In the event that the customers shipping address provided is deemed undeliverable by the shipping carrier, shipping fee's will not be refunded. Instead it is the customers responsibility to provide a deliverable address.
DEFECTIVE, DAMAGED, OR INCORRECT ITEMS SHIPPED
If you have received a defective, damaged, or incorrect product, do not worry! Please contact us by phone or the Contact Us Form within five (5) days of receiving the product, along with the invoice or packing slip, to schedule a return. We will replace these products at no additional cost. Please keep in mind that we may require photos for documentation and to authorize call tags for returns.
Because we put our customers’ experience first, any defective, damaged, or incorrectly shipped products by CTAM, or by our manufacturers, will be re-shipped at our expense. We will also provide you with a return shipping label with detailed shipping instructions.
Please note that if the item is damaged as a result of the customer’s actions, then a return will not be approved, and the damaged items will be discarded. If the customer wants to keep the damaged items, they must first cover the shipping fees, after which the company will return the damaged items. After the five (5) day time has expired, CTAM will not be responsible for any defective, damaged, or incorrect items, regardless of who is at fault.
Refunds
Once we receive your item, we will inspect it and we will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within 48 hours after product condition is verified.
Shipping Fees
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. For additional information in this section, create your own Return & Refund Policy.
Contact Us
If you have any questions on how to return your item to us, contact us using our Email Form Here… Or call during our business working hours at 1-877-284-7760
Related Items
| PART # | |
|---|---|
|
|