Flexo Heavy Wall Braided Sleeving
Expands Up to 150% Over Nominal Size - Available in: 3/8" - 4" Dia
Flexo Heavy Wall Braided Sleeving Features
- Highly Abrasion & UV Resistant
- Resists Gasoline, Solvents, Salt Water & Chemicals
- Braided From 15 mil PET Monofilament
- UV Resistant
- Available Up to 4" in Diameter
- Operating Temperature Range -103°F to 257°F (-75°C to 125°C)
- Braided Design Does Not Retain Moisture
- Melt Temperature 446°F (230°C)
Require Splice Free? Please Call 1877-284-7760
Inside Diameters Are Measured as Round Not Flat
Heavy Wall expandable sleeving is braided from 15 mil polyethylene terepthalate (PET) monofilament yarn that is 50% thicker than standard PET. This additional thickness provides more protection, durability, and enhanced abrasion resistance. This cable sleeving is tested and approved for use under FAR 23/25, FMVSS 302, UL and CSA material standards. Additionally, it is in compliance with RoHS, the European directive on the Restriction of Hazardous Substances.
Flexo Heavy wall braided sleeving is commonly used in industrial and outdoor applications. It is also highly-used in marine applications because of its durability; which makes it perfect for protecting hoses and cables from constant contact with rough surfaces. Flexo heavy wall cable sleeving is also ideal for covering chains and protecting trailer hitch harnesses scuffing.
To insure professional, long lasting installations, a hot knife or similar tool should be used to cut and seal the ends of the sleeving.
When your application calls for more protection than our 10 mil products provide, our 15 mil Heavy Wall is the ideal solution.
Heavy Wall braided sleeving is commonly used in industrial and marine applications where extreme abrasion protection is critical. The durability of flexo Heavy Wall makes it ideal for protecting hoses and cables that have to withstand constant contact with rough and abrasive surfaces.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
|Expans. Range||Standard Spool |
|Monofilament Thickness (ASTM D-204)||.015|
|Recommended Cutting||Hot Knife|
|Tensile Strength - Yarn (ASTM D-2265) lbs.||10|
|Moisture Absorption % (ASTM D-570)||.1 - .2|
|Hard Vacuum Data (ASTM E-595 at 10-5 torr)|
|Smoke D-Max (ASTM E-662)||56|
|Oxygen Index (ASTM D-2863)||21|
|Chemical Resistance |
1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected
|Salt Water (O-S-1926)||1|
|Hydraulic Fluid (MIL-H-5606)||1|
|Lubricating Oil (MIL-L-7808)||1|
|De-Icing Fluid (MIL-A-8243)||1|
|Fungus (ASTM G-21)||1|
|Maximum Continuous (MIL-I-23053)||257°F/125°C|
|Melt (ASTM D-2117)||482°F/250°C|
Request a Quote
Looking for a quotation ? We would be happy to help by providing a quick response, inventory status, and Volume Level pricing, when available. Please fill out the form below and a representative will be in touch with you within hours to one business day to answer any questions and quote your request.
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.