Heavy Duty Rubber Cable Protector
Protects cables indoor or out from heavy traffic
Features:• Protects multiple cables from pedestrian, car and truck traffic
• Heavy duty construction designed for use in commercial, industrial or residential settings
• Made of heavy duty, commercial grade rubber
• Top hinged lid for easy access to install cables
• For indoor or outdoor use
• High visibility black body with yellow lid
• Connectors allow units to be ganged together for modular expansion
These heavy duty cable protectors have multiple channels for the protection of a large number of wires. Hinged lid allows for top loading of cables for convenience. Made of commercial grade rubber it is suitable for use outdoors and indoors in most weather conditions. The black body color with a yellow lid is highly visible. These units will protect your cables from vehicles of up to 18,000 pounds per axle. Due to the heavy nature of this cable protector, it tends to stay where you put it. Operating temperature range is -40 to +130 °F.
From Our Satisfied Customer
“I purchased three (3) 35" sections of your 5 Channel Heavy Duty Rubber Cable Protector last year, and an additional 3 sections this year. It is mostly used to protect audio and power cables from foot traffic at indoor venues. In April of this year, I used all 6 sections outdoors to protect a heavy duty 12 gauge power cord running across an access road at a strip mall. I was told that since the parking lot where our band was playing would be closed, there would be little if any traffic over the road where the cable protectors were placed.
Contrary to what I was told, there was an almost continuous stream of cars and pickup trucks on this road. Based on the published weight ratings of the cable protectors, I wasn't at all concerned. I was a bit apprehensive when a 3 axle dump truck drove over the cable protectors, and more so when the local Fire Department drove their 5 axle Hook and Ladder truck over them. The cable protectors performed flawlessly, even with extremely heavy loads.
This is an excellent product, highly recommended. ”
|Item||Colors||Length||Width||Height||Channel Width||Chennel Height||Per Tire Capacity||Per Axle Capacity||Weight||Operating Temperature|
|2-Channel Heavy Duty Rubber Cable Ramp||Yellow Lid
|39-1/8"||10"||2"||1-1/8"||1-1/8"||6,000 lbs||12,000 lbs||15.75 lbs||-40°F to 131°F|
|5-Channel Heavy Duty Rubber Cable Ramp||Yellow Lid
|35-1/2"||21-13/16"||2"||1-1/4"||1-1/4"||12,000 lbs||24,000 lbs||46 lbs||-40°F to 131°F|
|2 Channel Extra Large Heavy Duty Cable Protector Ramp||Yellow Lid
|35 1/2"||24"||4"||3 3/4"||3 1/4"||5,000 lbs||10,000 lbs||63 lbs||-40°F to 131°F|
|3-Channel Extra Large Heavy Duty Cable Protector Ramp||Yellow Lid
|35 3/8"||19 3/4"||3"||2-1/2"||2-1/8"||12,000 lbs||24,000 lbs||46 lbs||-40°F to 131°F|
Place unit in position on the ground. Open lid, arrange cables, close the lid. Done.
Hey! When you have multiple cables that need protection, there are actually a lot of factors that you need to consider, not just the need for concealment. Cords can be vulnerable to things like excessive weight, temperature and weather, so your protector must be able to withstand a full range of forces., while still staying unobtrusive. Often, a cord protector that satisfies all of these concerns while being durable, can be costly. So this makes coverage of long runs quite expensive.
That is why at Cable Ties and More, our product the Heavy Duty Rubber Cable Protector, which comes with two or five inner channels, is such a valuable, quality item. Not only is it going to provide that comprehensive and hassle free protection, but it is absolutely one of the lowest prices in the industry for such a quality and dynamic cable protector.
Now, these protectors really are meant for heavy duty uses. They are crafted from a dense, commercial grade thermo plastic molded rubber, which is going to allow you to situate it either indoors or outdoors, as it can withstand the elements. Now, regardless of your location, you could be in a plant or factory setting, or even an outdoor festival, both people and vehicles can pass over easily, without difficulty, or any danger to your cords.
Withstanding 18,000 Lbs per axle for the 5 channel, and 12,000 Lbs per axle for the 2 channel, the 28 degree incline on the protector allows people and machines to smoothly travel over top, without a dramatic drop. Coming in lengths of 39 inches for the 2 channel, and 35 inches for the 5 channel model, you will install cords within by simply placing the unit wherever the cable run will be, and opening the hinged yellow lid which runs the length of the body. Lay the cables in the channels, assemble them however you wish, and close the lid when all is in order.
One of the most important features are these end connectors, because they will allow units to attach together firmly, and very securely. This expansion will allow you to cover and accommodate cable runs of any length. Now a final point to make about these fantastic, heavy duty protectors is they’re weight. Thermoplastic rubber is extremely sturdy and dense, so with the 2 channel model weighting 15.75 Lbs, and the 5 channel weighing 36, the units are going to be heavy enough to withstand shifting from external forces.
Our Heavy Duty Rubber Cable Protectors are unique in the capacity of their protection, while being easier to set up than many less resilient cord covers.
So rather than leaving the care of your cords in sub-par protection, make sure that you check out these multiple channel cable protectors from Cable Ties and More.
We really do offer them at some of the lowest prices you will find anywhere, for such strong, quality protectors. So please check out our website or give us a call, because we would love to hear from you.
Take care, and thanks for watching!