Flame Retardant Polypropylene Wire Loom
Slit tubing for high temperature cable protection
• operating temperatures from: -40ºF to +275ºF
• Extremely flexible and has very good chemical and abrasion resistance
• Black color allows for natural UV protection
• Easy to install
While some protective tubing is rigid, our Flame Retardant Polypropylene Wire Loom from CableTiesandMore.com fully guards your vital cables and wiring from not only intense heat, but also abrasion, chemicals, impact and crushing, while retaining all the flexibility your cables had before.
Being made of heat resistant polypropylene, the wire loom has an operating temperature of: -40ºF to +275ºF. Additionally, as the Polypropylene Flame Retardant Wire Loom is categorized as a V2 product by UL94 standards, any smoldering that does occur will be stopped in up to 30 seconds. This makes tube self extinguishing, adding the ultimate reassurance in those extreme temperatures. The Polypropylene tubing also has a slit which runs the length of your loom, allowing it to be slipped over even long runs of cable quite quickly. Furthermore, being black in color, the Polypropylene Flame Retardant Wire Loom allows for some natural UV protection.
Flexible convoluted tubing / conduit manufactured from a flame retardant polypropylene resin rated as V2 according to UL-94.
|Recommended Operating Upper Temperature||+275°F (135°C)|
|Recommended Operating Lower Temperature||-40°F (-40°C)|
|Typical Physical Properties||Test Method||Value||Units|
|Specific Gravity/Density||ASTM D792||1.05||-|
|Elongation @ Break||ASTM D638||980||%|
|Tensile Strength @ 25C||ASTM D638||15.5 min.||MPa|
|Flexural Modulus||ASTM D790||372||MPa|
|Notched Izod Impact Test||ASTM D256||12.9||ft lb/in|
|Underwriters Laboratory||UL-94 V2 @ 0.8 mm|
|FMVSS 302||Max. Burn rate of||101.2mm / min. (1.0 mm thick)Self-extinguishing|